Injection Tube System
The Spetec Injection Tube System is used in conjunction with the F400 or H100 as a primary waterstop in cold joints and pipe joints. This system can also be used in retrofit applications for expansion joints and other wide cracks or joints measuring over 3/8 of an inch.
Applications
- Primary waterstop system.
- Cold joints.
- Expansion joints.
- Replacement for traditional PVC waterstops.
Advantages
- Monolithic waterstop seal.
- Effective in applications with honeycomb concrete.
- Will not fold or crush with concrete weight.
- Can be injected under flowing water.
- Chemical resistance once injected.
- With NSF approved resin, can be installed in a potable water application.
ITS Kit Contents
- 100 lf of injection tube.
- 20 lf of 3/8″ reinforced PVC tube.
- 1/4″ clips (100).
- 12 3/8″ elbow hose barbs.
