AG200 is a three-component, water-swelling hydrogel based on acrylic that cures into an elastic product.
This is especially noted for its low blending viscosity that is almost equivalent to the viscosity of water.
Available Sizes
Applications
Consolidate soil and prevent erosion around floors, walls, etc.
Curtain grouting and soil stabilization.
Crack injection.
40 cps mixed viscosity.
Advantages
Low blending viscosity.
Certified To NSF/ANSI/CAN 61 (approved for contact with drinking water).
Accessories
A2 (TE)
Comp. B (SP)
Spetec Gel Reinforcing Agent
Equipment
Two-component acrylic pump with a clean out line.
×
"Alchemy-Spetec’s comprehensive Grout Guide will walk you through the grout and equipment selection process for any application via simple Yes or No questions."
Are there numerous leaks in proximity to each other?
Is the structure below grade?
Is the structure less than 6” thick?
Is there post-tension cabling present?
Post-tension cabling calls for a modified injection procedure or curtain grouting. (For details on the modified injection procedure, please call 404-618-0438.)
Is the structure below grade?
Will the area experience prolonged period of dryness?
Inject with one of the following hydrophilic grouts:
For guidance specific to your project, call Tech Support at 404-618-0438.
Please note that some hairline cracks may require Spetec AG200 Acrylic Injection Resin. Please contact Alchemy-Spetec for site specific technical support.
For guidance specific to your project, call Tech Support at 404-618-0438.
Please Note that some high-flow leaks may require Spetec Boom! Seal, or advanced application techniques. If post-tension cabling is present be sure to refrain from drilling and contact Alchemy-Spetec for technical support.
Accessory products and equipment: (Call 404-618-0438 for more info.)
