SLAB LIFTING & FOAM JACKING EQUIPMENT
50’ Heated Hose
TC or Non-TC. Pictured without scuff jacket. Available with or without scuff jacket. Available psi ranges: 2000 – 3500.
Sidewinder Hose Wrap
Sidewinder Hose Wrap incorporates the most advanced insulation and abrasion-resistant materials to enhance application and provide higher yields when pushing foam. Available in both insulated and non-insulated versions, Sidewinder installs in minutes and offers unmatched hose protection from heavy abrasion, moisture, and temperature energy loss.
6’ Non-Heated Whip Hose
Pictured with scuff jacket. 1/4 x 10’ whip hose assembly. 3500psi. Includes a third high-pressure line for water supply on MixMaster Pro gun or air supply on pneumatically-actuated guns. It’s always good to keep a spare on hand (like a spare tire).
10’ Heated Whip Hose
Pictured with scuff jacket. 1/4 x 10’ whip hose assembly. 3500psi. It’s always good to keep a spare on hand (like a spare tire).
A-Side In-Line Filter
The A-Side In-Line Filter for slab lifting applications is a critical component designed to prevent crystallization chunks, debris, or contaminants from reaching the slab lifting gun, which could clog the system and disrupt operations.
Jack Attack System
Leverage device for positioning small to medium slabs into place while lifting or stabilizing with polyurethane. Easy for one person to operate. Triangular steel frame.
This photo is from a job in which the front porch settled away from the home causing columns to separate from the roof line. On one end the slab had actually cracked in two and was settled away from the home as well as parallel to the home. You can see the triangle-shaped Jack Attack System holding the slab in place as foam is injected underneath.
Even with the largest polyurethane rigs on the market, manipulating small slabs can be very tedious. For these small to medium slabs we recommend the Jack Attack System. It makes even the most troublesome sidewalk slab a piece of cake and you will use less foam as well.
Fittings, Packers and Couplers
Button Head Fittings
Button head fittings are engineered for high-volume resin flow, offering a smooth surface that facilitates easy coupler engagement and removal. They are an ideal accessory for Deep Lock® applications.
Ports and Mixers
Tapered ports ensure a secure seal between injection guns and concrete or other structures, enabling a seamless injection process with MixMaster Pro slab lifting guns.
Concave ports with a sealing sleeve ensure a secure connection to concrete, enabling a reliable and seamless injection process with PX-7 slab lifting guns.
Our low-pressure PolyBadger system incorporates a static mixer and tapered port to guarantee thorough product mixing prior to injection.
Tubing Injection Assembly
The tubing injection assembly provides a reliable mechanical connection to injection pipes for the Deep Lock® process. Designed to work in tandem with button head fittings, it enhances system performance.
Alchatek Flushes & Soaks
Alchatek Pump Flush
High-performance pump flush that is friendly to the environment and does an excellent job flushing out injection pumps. (Read more…)
Alchatek Surface Guard 125
Water-based gun flush is specifically used for flushing out the MixMaster impingement gun. Also used to protect concrete from resin stains. (Read more…)
Alchatek Soak 130
Cleans cured resin from metal components. (Read more…)
